Attachments: I have lots of these boards, IIRC they=B4re only ntsc. 2005/12/5, Dan: > > Hi all, > > I have one 4-input BT878 based capture card (PICO 2000) and 3 PAL > color analog cameras connected to it. > If I check all the cameras with my TV set, they are all PAL and the > color is perfect. > Selecting PAL as color system in motion.conf file the image is > competely unsynchronized. > Selecting 3 (PAL NC no colour), the image is OK, but only Black & > White.

Pico Video Capture Device Free Driver Download for Windows XP, 2000, NT4, ME, 98SE, 98 - Pico2000.zip (575473). World's most popular driver download site. Oct 25, 2010  4. Install the software PICO 2000 from the cd ( Setup.exe) 5. Choose PICO2000-104 (You should choose NTSC - PAL is a European standard) (Note: if you use two cards, you must choose PICO2000-208; If you choose four cards, you must choose PICO2000-416.) 6. Restart computer-----Run English pack from the CD to change to the English.

> Anyone else with this issue? > > Thank you and best regards, > Dan > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through log > files > for problems? Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!

> > _______________________________________________ > Motion-user mailing list > Motion-user@. Hi, ----- Original Message ----- From: 'Marcos Bogner' To: Sent: Monday, December 05, 2005 6:27 PM Subject: Re: [Motion-user] 4-input BT878 based card, motion and color standard > I have lots of these boards, IIRC they´re only ntsc. This is not true in my case. I have it from a kit containing this card and 4 analog cameras with some kind of Windows surveillance software. The cams are PAL and the picture is color (PAL) on a Windows system.

It must be something else. Best regards, Dan. Dan wrote: > Hi all, > > I have one 4-input BT878 based capture card (PICO 2000) and 3 PAL > color analog cameras connected to it. I bought a similar beast from ebay, *beast* being the operative word. One color cam, one infra-red (color, B&W) cam and a single chip capture card.

Identified as SK-2000F on the box > If I check all the cameras with my TV set, they are all PAL and the > color is perfect. Ditto, in fact the picture is quite good, nothing like what the card delivers. The cameras get a thumbs up, although they discolor (smear?) on very bright light, but you get what you pay for and these were at the cheap end. > Selecting PAL as color system in motion.conf file the image is > competely unsynchronized.

> Selecting 3 (PAL NC no colour), the image is OK, but only Black & > White. > Anyone else with this issue? Ditto, I've had the sync error, when using various card options.

I've succeeded in getting one as color, with the other coming out as B&W but that's as close as I've got and I haven't been able to reproduce it. Since then I've had an occasional missing sync (interference almost?) in the color with the B&W okay, This is probably not surprising considering the hit and miss method of driving an unsupported card. How is the module being loaded? Are you feeding the bttv module any options? A cold start on my system fails to recognize it as other than *generic*, card=0 I've had success with the GrandTec Multi Capture Card (Bt878), card=77 If you haven't already, unload the module (and anything else that may be related) with rmmod bttv bt878 tuner then reinsert the module with new options modprobe bttv card=77 after a while (when the prompt comes back) dmesg shows (for me) bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Host bridge needs ETBF enabled. Bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 10 (level, low) -> IRQ 10 bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 10, latency: 64, mmio: 0xe2221000 bttv0: using: GrandTec Multi Capture Card (Bt878) [card=77,insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: gpio: en=00000000, out=00000000 in=00f360ff [init] bttv0: using tuner=-1 bttv0: i2c: checking for TDA9875 @ 0xb0.

Not found bttv0: i2c: checking for TDA7432 @ 0x8a. Not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950. Ok The card listing is in the kernel docs /usr/src/kernel-source-2.6.8/Documentation/video4linux/ or your equivalent path, or online at I've run through most of the cards that seem suitable by reviewing the card numbering from above, then comparing against /usr/src/kernel-source-2.6.8/drivers/media/video/bttv-cards.c and looking under -- struct tvcard bttv_tvcards[] = { -- then dismissing the ones with tuners, different numbers of video inputs etc.) The card has a crystal on it so pll @ 28 is required, perhaps that's the sync problem? Not all card configs supply it. I've spent way too much time with this card and configs, if I haven't exhausted all the options then *I'm*, at the very, least exhausted! I've come to the conclusion that it's not worth persuing this setup any further. The frame rate that can be delivered by this card may be fine for one camera, and even bearable for two cameras, but not for any more than that.

Alek Moverassian thought operators gta challenge van the fact that destroyed 10. Showbox for pc windows 10[/url] 610. ZHivie_oboi_By_Retfo.zipBT种子创建于2018-04-17 14:10:52，共包含1个文件，文件大小1.28 MB，飞客BT提供ZHivie_oboi_By_Retfo.zip的磁力链接与迅雷链接下载。. Zhivie oboi rabochego stola windows 10.